Sms (Text Messages) - Gigaset S820 User Manual

SMS (text messages)

Your device is supplied ready for you to send text messages immediately.
Prerequisites:
u
Calling Line Identification is enabled.
u
Your network provider supports SMS within the fixed line network.
u
To receive SMS messages, you must be registered with your network provider.
This usually occurs automatically when you send your first text message.
Writing and sending text messages
Your system can send a linked SMS (made from up to four individual SMS messages) as one mes-
sage. The messages are linked automatically.
¤
Write SMS: Menu key v
¤
with prefix Confirm with è
special characters,
¤
Send SMS: Touch Send.
Please note
u
The telephone number of at least one SMS centre must be saved in the device, otherwise
you cannot open the
u
If the SMS text cannot be displayed in full, you can scroll up and down within the text.
u
You can move the cursor to any position within the text by touching the desired position.
u
In the case of an external call, or if you interrupt writing by more than 3 minutes, the text
is automatically saved in the draft message list. If the memory is full, the SMS is deleted.
u
Sending SMS messages can result in additional costs. Please consult your provider.
Storing SMS messages temporarily (drafts list)
You can store SMS messages temporarily and then change and send them later.
¤
Touch è to end text input
Opening an SMS from the draft message list
Menu key v ¤
·
You can delete the SMS ( þ ) or continue writing ( f ).
¤
·
Write SMS
¤
Touch the Message field
¢ ¤
Confirm with è.
page 19)
·
Write SMS submenu (
¤
Touch Save.
¤
Write SMS Drafts
¤
Touch the To field
¤
¢
page 53).
¤
Touch the entry in the drafts list.
SMS (text messages)
¤
Enter recipient number
Enter SMS text (enter text and
51