Safety
Getting Started
Home
Prev Next
Installation
USB Drivers
Troubleshooting USB Problems
Follow these steps if the PC does not auto-detect the Cable Modem using a USB
connection.
Before you start, make sure that:
•
You have properly installed and configured the Cable Modem as shown in
Installing and Connecting Your Cable
•
You have installed the USB drivers as shown in
Your
•
The cable company has set up your account. Call your cable company if
you're not sure.
Instructions
1
Be sure that your PC is running either Windows 98SE, Windows 2000, Win-
dows ME, or Windows XP (Windows 95 and Windows NT are not supported).
2
Be sure the Cable Modem has power. The Power light should be on.
3
Push the Reset button on the back panel of the Cable Modem, using a pen
tip or other sharp non-metallic object.
4
Disconnect the USB cable from the PC and reconnect it.
5
Restart the PC.
6
Do the following to uninstall and the reinstall your USB drivers:
a. Disconnect the USB cable to the Cable Modem.
b. Insert the Cable Modem CD-ROM into you computer.
c. Start the uninstall utility on your CD-ROM. Follow the on-screen instruc-
tions carefully.
d. Reconnect the USB cable.
e. Re-install the USB driver as shown in
7
Replace the USB cable.
8
Call your cable company for help.
CM550 Cable Modem User's Guide
Usage
PC.
Troubleshooting
Glossary
Modem.
Installing USB Drivers on
Installing USB Drivers on Your
PC.
44