Table of Contents
Advertisement
Trouble
• Heater is
☛ When the heater is in Thermostat
Blowing Cold
Mode and reaches the set
Air.
temperature it will automatically
perform a 60 second cool down
(blowing cold air) to ensure
thermostat accuracy. The Power
Light will flash during the cool
down period.
☛ Power Button may have been
pressed to turn off the heater.
• Fan Speed
☛ Heat & $ave
Doesn't
output of the heater and not the
Change.
fan speed. Fan runs at the same
speed on all settings.
• Unexpected
☛ You may hear a popping or
Noise.
crackling sound as the heater heats
up. This is normal and safe
operation. Once the heater heats up,
the crackling sound will go away.
• Unexpected
☛ There may be an odor or vapor
Smell.
coming from the heater the first
time you use it or after prolonged
or seasonal storage.
If you have any questions regarding your product or would like to learn more about other Bionaire
contact our Consumer Service Department at 1-800-253-2764 or visit our website at www.bionairecanada.com. For
inquiries regarding recycling and proper disposal of this product, please contact your local waste management facility.
T R O U B L E S H O O T I N G
Troubleshooting for your Heater
Probable Cause
control the heat
TM
Solution
✔ Raise the temperature higher.
✔ Press the Power Button to turn on the heater.
✔ Press the Up Button to the highest temperature
setting for maximum heat output.
✔ If the noise persists call Bionaire at
1-800-253-2764.
✔ This is normal and is the result of dust or other
debris accumulating on the heating element.
Make sure the heater is in a well ventilated area
and continue running until the odor or vapor goes
away.
products, please
®
Advertisement
Table of Contents
