Cleaning & Maintenance; Troubleshooting - Bionaire BFH2242M Instruction Manual

C L E A N I N G / M A I N T E N A N C E
AUTO SAFETY SHUT-OFF
This heater is equipped with a patented, technologically
advanced, safety system that requires the user to reset
the heater if there is a potential overheat situation. When
a potential overheat temperature is reached, the system
will automatically shut the heater off. It can only resume
operation when the user resets the unit.
To Reset the Heater:
1) Turn Control to OFF ( ).
2) Unplug the unit and wait 30 minutes.
3) Plug in and operate normally.
CLEANING/MAINTENANCE
Always unplug the heater before cleaning and allow the
heater to cool down.
1. Clean the unit with a soft cloth moistened with a mild
soap solution.
2. NEVER use abrasive or flammable solvents to clean
the unit.
3. After cleaning, be sure to completely dry the unit
with a cloth or towel.

TROUBLESHOOTING

If your heater fails to operate:
• Turn the heater OFF and UNPLUG THE HEATER.
• Make sure the electrical outlet or circuit breaker is
working.
• Check for obstructions. If you find an obstruction turn
the heater OFF, and unplug the unit. Carefully
remove the obstruction and follow the reset
instructions.
• The temperature may be set too low. Turn the
Thermostat Control to a higher temperature level
until the heater restarts.
T R O U B L E S H O O T I N G
• Make sure to follow the above instructions to turn on
the heater and set the digital thermostat to your
precise comfort level.
Please DO NOT attempt to open or repair the
heater.
HEATER STORAGE
1. Store heater unit with cord in a cool, dry location.
2. We recommend storing the unit and cord in the
original package.
If you have any questions regarding your product or
would like to learn more about other Bionaire
products, please contact our Consumer Service
Department at 1-800-253-2764 or visit our website at
www.bionaire.com. For inquiries regarding recycling and
proper disposal of this product, please contact your local
waste management facility.
®