Troubleshooting; After Sales Service - Envirovent IPX4 Installation Manual

08

Troubleshooting

•
Check feed/power supply
•
Have you checked connections (green male/female connector)?
•
Have you removed printed circuit board for any reason?
•
Is the cartridge correctly seated (no stray wires trapped)?
•
Does the impeller spin freely (check click)?
•
Is the front cover in place?
•
Does the pullcord activate freely?
•
If you still experience difficulties then please call our hotline on 0345 27 27 810

AFTER SALES SERVICE

We recommend that you do not dismantle or remove any other parts than those mentioned, as
any tampering would automatically cancel the guarantee. If you detect any fault, please contact
0345 27 27 810
EnviroVent on
OTHER APPLICATIONS/VARIATIONS
For recessed only installations we can supply a bezel.
In the unlikely event of any on-site installation problems or queries regarding the EnviroVent
Filterless Extract Fan, just call our hotline number. We will take your details and appoint
a regional installation manager to call you back to discuss the problem. In the majority
of cases, the problem can be resolved over the phone. However, in cases where the
problem cannot be resolved over the phone, we will arrange a visit from our Gold Standard
Engineer. He will meet with your contractor/direct labour on-site to discuss and resolve
the problem, he will also provide training and give advice on the installation of the fan.
09
.
Gold Standard After Sales Service
Installer Hotline: 0345 27 27 810
SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL