Troubleshooting; After Sales Service - Envirovent SELV Installation Manual For Engineer / Installer

TROUBLESHOOTING

•
Check feed/power supply
•
Have you checked connections (green male/female connector)?
•
Have you removed printed circuit board for any reason?
•
Is the cartridge correctly seated (no stray wires trapped)?
•
Does the impeller spin freely (check click)?
•
Is the front cover in place?
•
Does the pullcord activate freely?
•
If you still experience difficulties then please call our hotline on 01423 859 395

AFTER SALES SERVICE

We recommend that you do not dismantle or remove any other parts than those mentioned, as any
tampering would automatically cancel the guarantee. If you detect any fault, please contact EnviroVent on
01423 810 810.
OTHER APPLICATIONS/VARIATIONS
For recessed only installations we can supply a bezel.
ON-SITE INSTALLATION AFTER SALES SERVICE
Please ensure that you have read and understood the installation instructions.
In the event of an on-site installation problem or if you have any queries regarding the
EnviroVent fan, just call us and ask to talk to a member of our technical team.
In the majority of cases the issue can be resolved over the phone.
However in cases where the problem cannot be resolved over the phone, contact your
On-site call outs are available, note that charges may apply.
7
HOTLINE NUMBER: 01423 859 395
wholesaler to agree a return.
SHOULD YOU ENCOUNTER ANY PROBLEMS INSTALLING THIS UNIT CALL
01423 859 395
FILTERLESS EXTRACT FAN