Sensor Data Transmission; Clock; Clock Reception; Reception Signal - Oregon Scientific RMR683HG User Manual

Hide thumbs Also See for RMR683HG:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

SENSOR DATA TRANSMISSION

The sensor reception icon in the temperature and
humidity area shows the status.
ICON
N
DESCRIPTION
DESCRIPTION
Main unit is searching for the
Main unit is searching for the
se
sensor(s)
A channel has been found
and sensor signal is being
and sensor signal is being
received
receive
and "- - . -"
The sensor cannot be found.
The sensor cannot be found.
(Temperature
(Temperature
Search for the sensor or
Search for the sensor or
and Humidity Area) check batteries
and Humidity Area) check batteries
To search for a sensor:
Simultaneously, press and hold MEM and CHANNEL
for 2 seconds.
NOTE If the sensor is still not found, check the batteries,
If the sensor is still not found, check the batteries,
obstructions, and remote unit location.

CLOCK

CLOCK RECEPTION

This product is designed to synchronize its date and time
automatically once it is within range of :
DCF77 generated from Frankfurt, Germany for
Central Europe.
MSF60 generated from Rugby, England.
The clock collects the radio signals whenever it is within
1500 km (932 miles) of a signal.
NOTE Slide the
Slide the EU / UK switch to appropriate position
for your location. Repeat each time you reset the unit.
NOTE Initial reception takes 2-10 minutes for fi rst set
Initial reception takes 2-10 minutes for fi rst set
up or when RESET is pressed. Once complete, the
reception icon will stop blinking. If the signal is weak, it
can take up to 24 hours to get a valid signal.

RECEPTION SIGNAL

Clock signal reception indicator:
STRONG SIGNAL
STRONG SIGNAL
STRONG SIGNAL
WEAK SIGNAL
WEAK SIGNAL
WEAK SIGNAL
WEAK SIGNAL
To enable and force a signal search:
Press and hold
for 2 seconds.
To disable the signal reception:
Press and hold
for 2 seconds.

SET CLOCK

If the clock signal reception is enabled and a signal is
being received the clock does not need to be manually
set.
To manually set the clock:
1. Press and hold MODE for 2 seconds.
7
NO SIGNAL
NO SIGNAL
NO SIGNAL
NO SIGNAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents