Sensor Data Transmission; Manually Set Clock; Temperature - Oregon Scientific RAR813 User Manual

SENSOR DATA TRANSMISSION

To manually search outdoor sensor:
Press and hold MODE and
The reception icon of the outdoor temperature shows
the status as follows,
ICON
TIP The transmission range may vary depending
on many factors. You may need to experiment with
various locations to get the best results.

MANUALLY SET CLOCk

To set the clock manually:
1. Press and hold MODE.
. Press or to change the settings. You can press
and hold these buttons to rapidly set the values.
3. Press MODE to confirm.
4. The settings sequence is 1/4 hr format, hour,
at the same time.
DESCRIPTION
Main unit is searching for
sensor(s).
A channel has been found.
The sensor cannot be found.
minute, year (Y), calendar mode (day (D) – month
(M) / month (M) – day (D)), month, day and
weekday language.
NOTE
The language options are E (English), F
(French), D (German), I (Italy) and S (Spanish).
To select display mode:
Press MODE to choose between clock with seconds,
clock with weekday or calendar.

TEMPERATURE

To select the temperature display unit:
Press the °C / °F button to select the desired unit.
To toggle between each outdoor sensor's readings:
Press CH repeatedly.
OR
Press and hold MEM and
auto-toggling of outdoor channels.
OR
To end press .
To toggle between current, minimum and
maximum records:
Press MEM repeatedly.
To clear the records:
Press and hold MEM.
6
for  seconds to initiate