Cleaning The Carrier Sheet - Fujitsu ScanSnap S1500M Operator's Manual

■ Cleaning the Carrier Sheet

As you keep using the Carrier Sheet, dirt and dust will accumulate on the surface and the
inside.
Clean the Carrier Sheet regularly because it may result in scanning errors.
How to perform cleaning
Gently wipe the dirt and dust off the surface and the inside of the Carrier Sheet with a cloth
moistened with Cleaner F1/mild detergent.
Do not use paint thinner or any other organic solvents.
Do not use force to rub against the Carrier Sheet because it may be damaged or deformed.
Be careful not to leave any crease on the Carrier Sheet.
After cleaning the inside of the Carrier Sheet with a cloth moistened with Cleaner F1/mild
detergent, make sure that it is completely dry before closing the Carrier Sheet.
The Carrier Sheet should be replaced approximately every 500 scans.
For details about purchasing the Carrier Sheet, refer to
461).
Purchasing/Cleaning the Carrier Sheet
"Purchasing the Carrier Sheet" (page
462