Fujitsu ScanSnap S1500M Operator's Manual page 116

Using the Quick Menu
To use the Quick Menu, you need to select the [Use Quick Menu] check box in the ScanSnap
setup dialog box.
For details about how to perform scanning by using the Quick Menu, refer to
Menu" (page
1.
Load a document in the ScanSnap.
For details about how to load documents, refer to
Up to ten files can be attached to an e-mail message.
When you scan more than one document with the scan settings shown below, multiple files
are created. Pay attention to the number of documents to scan:
File format: JPEG (*.jpg)
[Generate one PDF file per (n) page(s)] check box is selected
2.
Press the [Scan] button on the ScanSnap to start a scan.
The Quick Menu appears when the scanning is completed.
3.
Change the settings for [Scan to E-mail] (If you do not want to change
any settings, go to step 4.).
1. Move the mouse cursor to the
the [Settings] menu.
The [Scan to E-mail - Options] dialog box appears.
73).
116
Actions (for Windows Users)
"How to Load Documents" (page
mark on the [Scan to E-mail] icon, and then select
"Using the Quick
32).