Fujitsu ScanSnap S1500M Operator's Manual page 263

The [Recommended] button is selected in default.
For details about the default settings when using the Quick Menu, refer to the
ScanSnap Manager Help.
You cannot change the settings for the [Recommended], [Small File], and [High Quality]
buttons. If you change any of these settings, the profile automatically switches to
[Customize].
For details about how to change scan settings, refer to
Settings" (page
4.
Click the [Apply] button.
5.
Click the [ ] button in the upper left corner to close the ScanSnap
setup window.
6.
Load a document in the ScanSnap.
For details about how to load documents, refer to
7.
Press the [Scan] button on the ScanSnap to start a scan.
The [Scan] button setting is [Duplex Scan (Double-sided)] in default. Note that you can
switch the [Scan] button setting to [Simplex Scan (Single-sided)] in ScanSnap
Manager. For more details, refer to
386).
You can also start scanning from the ScanSnap Manager menu.
For more details, refer to
Do not connect or disconnect the ScanSnap and other USB devices during scanning.
Do not close the ADF paper chute (cover) during scanning.
Do not switch users during scanning.
The [Scan] button on the ScanSnap flashes in blue throughout the scan.
The [ScanSnap Manager - Image scanning and file saving] window appears.
The Quick Menu appears when the scanning is completed.
How to Perform a Scan (for Mac OS Users)
275).
"Scanning Only One Side of a Document" (page
"ScanSnap Manager Menu" (page
263
"How to Configure Scan
"How to Load Documents" (page
258).
32).