Xerox Document Centre 706 Series User Manual page 225

Condition
Settings System Setup Print
Mode:Forced Print
(Cancel Print)
Mode>Common Settings
Paper Tray Attributes Trays
for APS/ATS
Cause
Tools Mode Common
Tools
Disable
15.1 When Problems Occur
Treatment
"Chapter 13 Configuring by
the Tools Mode Screen"
"Chapter 13 Configuring by
the Tools Mode Screen"
When the memory capacity is
not enough, the printer will
disable the interface
automatically and reboot.
User Guide (Copier)
Print Mode:Forced Print
Yes (Change Size).
No
Enable
"Chapter 13 Configuring by
the Tools Mode Screen"
#
209