Connecting The Telephone - Geemarc Wake'n'Shake Instruction Manual

CONNECTION

1- CONNECTING THE TELEPHONE

DC Adaptor
(**)230V
PTT plug
Shaker
1 - Connect the PTT line cord.
2 - At your option you may connect your telephone in
the doubler plug.
3 - Connect the PTT doubler plug in the wall socket.
4 - Connect the adaptor line cord.
5 - Connect the adaptor in the wall socket. (**)
(**)Classified "hazardous voltage" according to EN60950 standard.
Electrical connection: The apparatus is designed to operate at DC9V,
650mA. The power adaptor supplied operate from AC100 – 240V,
50/60Hz input.
The apparatus does not incorporate an integral power on/off switch.
To disconnect the power, either switch off supply at the mains
power socket or unplug the DC adaptor. When installing the
apparatus, ensure that the mains power socket is readily accessible.
Telephone connection: Voltages present on the
telecommunication network are classified TNV-3
(Telecommunication Network Voltage) according to the EN60950
standard.
2