Setting The Time; Setting The Alarm Time; 12 / 24 Hour Format - Geemarc Wake'n'Shake Instruction Manual

SETTING

2- SETTING THE TIME (

- Press and hold
- Press H (hour) and M (minute) until correct hour and
minutes appear on the display.
- Release
- For p.m. hours, the p.m. indicator will appear on the
display near the inscription PM.

12 / 24 hour format

User can select which hour format to use. To select:
- Press and hold the H (hour) button for 6 seconds to
enter the hour selection mode, the display shows
"12H" or "24H", then release the hour button.
- Press the H (hour) button to toggle between 12 or 24
hours.
Note: If no selection made within 4 seconds, the last
showed format will be chosen, and the clock will return
to normal time mode.

3- SETTING THE ALARM TIME (

- Press and hold
- Press H (hour) and M (minute) until correct hour and
minutes appear on the display.
- Release
- Press
(set clock) button.
(set clock) button.
(set alarm) button.
(set alarm) button.
, H and M to reset the alarm clock to 12.
)
3
)