Step 4. Positioning, Leveling, and Securing
the Fireplace
The diagram below shows how to properly position,
level, and secure the fireplace.
Figure 22. Proper Positioning, Leveling, and
Securing of a Fireplace
• Place the fireplace into position.
• Level the fireplace from side to side and from front to
back.
• Shim the fireplace with non-combustible material, such
as sheet metal, as necessary.
• Secure the fireplace to the framing by nailing or screw-
ing.
• Holes are provided in the base pan for securing the unit
to the floor.
NAILING
TABS
(BOTH SIDES)
Step 5. The Gas Control System
WARNING: THIS UNIT IS NOT FOR USE
!
WITH
SOLID FUEL.
IPI PILOT
Figure 23.
Gas Control System
Intermittent Pilot Ignition (IPI) System
This system includes a 3V control valve, electronic mod-
ule and intermittent pilot.
WARNING: CONTINUOUS 1 10-120 VAC
!
SERVICE MUST BE WIRED DIRECTLY TO
THE FIREPLACE JUNCTION BOX IN A IPI SYSTEM.
22
FLAME
SENSOR
ROD