Concealed Floor Standing Type (R1 Type); Required Minimum Space For Installation And Service; Dimensions And Part Names - Panasonic S-12MU1U6 Installation Instructions Manual

■
Floor Standing Type (P1 Type)

Concealed Floor Standing Type (R1 Type)

3-54. Required Minimum Space for Installation and Service

Install the unit where cooled or heated air from the unit can
circulate well in the room. Do not put obstacles which may
obstruct the air fl ow in front of the air intake and outlet grilles.
NOTE
Ensure there is adequate space for maintenance of the electrical
component box, air fi lter, and refrigerant tubes.

3-55. Dimensions and Part Names

Floor Standing Type (P1 Type)
4-Ø15/32" holes (for fastening the indoor unit to the fl oor with
screws)
Air fi lter
Refrigerant connection outlet (liquid tube)
Refrigerant connection outlet (gas tube)
Level adjusting bolt
Drain outlet (20 A)
Power cord outlet (downward, rear)
Refrigerant tubing outlet (downward, rear)
Location for mounting the remote controller
(remote controller can be attached within the room)
2-1/8
VRF_Indoor_US.indb 58 VRF_Indoor_US.indb 58
C
B
A
Air outlet
2-1/8
Air inlet
Fig. 3-178
Horizontal view
min.
3-15/16"
min. 3.3 ft.
Length
A
Type
7, 9, 12 41-59/64 26-3/16
15, 18
54-21/64 38-37/64
24
6-11/32 1-1/32
Side panel
Refrigerant tubing space for
downward tubing
Rear-tube outlet
58
Vertical view
min.
3-15/16"
min. 3.3 ft.
Fig. 3-177
Unit: in.
Liquid Gas
B C
tube tube
24-7/8
Ø1/4 Ø1/2
37-9/32
Ø3/8 Ø5/8
9-17/64
2-23/32
8-5/32
8-17/64
2011/09/30 12:23:11 2011/09/30 12:23:11