When Using Wireless Remote Controller Instead Of Wired Remote Controller - Panasonic S-12MU1U6 Installation Instructions Manual

3-52. When Using Wireless Remote Controller Instead of Wired Remote Controller

When the wireless remote controller is to be used, slide the switch on the indoor unit control PCB.
●
If this setting is not made, an alarm will occur. (The operation lamp on the display blinks.)
●
This setting is not necessary if both the wired remote controller and wireless remote controller are used.
●
The location of the switch varies depending on the type of PCB used. Check the model name before making the
setting.
NOTE
This setting is necessary also in case of "non-using wired/wireless" remote controller.
(ex. central control using only an intelligent/system controller)
●
S-07MK1U6 / S-09MK1U6 / S-12MK1U6
●
S-18MK1U6 / S-19MS1U6 / S-24MK1U6
VRF_Indoor_US.indb 53 VRF_Indoor_US.indb 53
Setting at time of
factory shipment
Setting at time of
factory shipment
53
Slide No. 3 on SW101
from ON ➞ OFF.
Slide No. 3 on SW101
from ON ➞ OFF.
2011/09/30 12:23:11 2011/09/30 12:23:11