Advertisement
F
T
IRES OF
RADITION
Apply a bead of cement along top edge
of the left and right slip and the inside
edge of the beam, where the fourth piece
of the slip kit comes in contact with the
beam.
Carefully lower the arched top slip be-
hind the beam and into position on top
of the side slips.
Carefully wipe the extra cement off the
joints.
I
I
NSTALL
NSTRUCTIONS FOR
top of the legs, and install another
wooden shim between the bracket and
the block on each side. This will hold the
beam against the wall in a secure man-
ner.
beam meets the top of the legs to insure
that the joint is good, and the leg is not
twisted.
Step #14
Step #16
centered along the top edge of the
horizontal 2x4.
P
10
AGE
OF
J
T
URASTONE
ORRANCE
Check the fit of the beam against the
Check alignment of the joint where the
Install the shorter remaining bracket
18
#4004
Step #15
Step #15
Advertisement
