Advertisement
side (see Fig. 3),
If necessary adju t
the two levelling screws
located just behind the
front legs
(Fi
3
3)
so
that they touch
the hearth.
5.5
To fit the dress guard place the lowers oegs into the holes in the
bottom apron, and by bowing the too ic te the upper pegs in
the bosses fastened to the side
trims
'Hq. 3).
5.6
Refit the qas tap knob.
6.
FINAL OPERATiON CHEC
Re-check th igntion ann opurate
trio ire
on all settings.
NOTE:
The pieces of coke
adjacent
t.
the two decorative flame
may be adjusted to qive the be
rane appearance.
7.
MAKE SURE THAT THE USER KNOWS THAT:
7.1
The tap must be pressed in nefore tu
ry anti-clockwise.
7.2
To light the fire the
tap
must be
tu
d to the fullest extent
when a click will be heard from the
ignition.
7.3
A match or taper may be used to ugh
th
fire if necessary.
7.4
Paper, rubbish, etc. must not he thron
on
to the fire to burn,
7,5
In the event of the glass front
pane
beirg damaged the fire should
he turned off and not used until the
ass has been replaced.
7.6
Should it be necessary the coke can Le replaced.
(Refer to the
Users instructions).
7.7
The fire may smell slightly for a per od due to its newness.
7.8
A flame failure device button is bce
d under the right hand side
of the front apron which must be held
i
until the flame is
estabi ished.
9
Advertisement
