Product Delivery; General Advice; General Safety Notes - ECM MECHANIKA PROFI DUE Instruction Manual

1

PRODUCT DELIVERY

1 filter holder 1 spout
1 filter holder 2 spouts
1 filter 1 cup
1 filter 2 cups
1 blind filter
1 measuring-spoon
1 coffee tamper
1 instruction manual
1 cleaning brush
1 flexible hose for fresh water supply: 1/8 " connection for machine + 3/8 " for connection waterpipe
2

GENERAL ADVICE

2.1 General safety notes

• Make sure that the local main supply voltage corresponds to the information given on the type
plate on the front panel of the espresso machine.
• Carry out the installation of the machine according to the instruction in chapter 4.
• Plug the machine into a grounded socket only and do not leave it unattended.
• Do not roll or bend the power cord.
• Do not use an extension cord/ do not use a multiple socket.
• Place the machine on an even and stable surface. You can regulate the height of the machine by
adjusting the feet of the machine.
• Never place the machine on hot surfaces.
• Never immerse the machine in water; do not operate the machine with wet hands
• The machine should only be used by experienced adult persons.
• The machine is not intended for use by persons (including children) with reduced physical, sensory
or mental capabilities, or lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• Do not expose the machine to inclement weather (frost, snow, rain) and do not use it outdoors.
• Keep the packing out of the reach of children.
• Only use original spare parts.
• Do not operate the machine with carbonated water, but with soft potable water.
• Do not operate the machine without water.
If you have any further questions or if you require any further information, please contact your specialised dealer
before starting up the espresso coffee machine.
Our machines comply with the relevant safety regulations.
Any repairs or changes of single components must be carried out by an authorised specialty dealer. If the supply cord
is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid
a hazard.
In case of non-observance the manufacturer does not assume liability and is not liable to recourse.
Ask for authorised service points outside Europe. See page 1 for your specialised dealer's contact details.
Important
When necessary, make use of a water softener / water filter cartridge in order to reach an adequate
hardness level. If these measures are insufficient, a prophylactic descaling of the machine may be
required. Contact your specialised dealer before undertaking this measure.
Instruction manual MECHANIKA & TECHNIKA PROFI DUE
19
ENGLISH