Changing Date And Time - Abus Terxon MX Operating Instructions Manual

Intruder alarm panel
Table of Contents

Advertisement

Available languages

Available languages

Rauchm. Ala.
Zone nn has triggered a fire alarm
ZN nn
Rauchm. Ala.
Zone nn fire alarm reset
ZN nn
Detector test ZN
Zone nn sensor test failed
nn
Siren tamper
Siren tamper alarm reset
reset
Sir. Sabo
Siren tamper alarm triggered
System auto
System automatically rearmed
active
System started
System supplied with power and
started
Sabo ZN nn
Zone nn has triggered a panic alarm
Sabo ZN nn OK
Zone nn panic alarm reset
Tech ZN nn
Zone nn has triggered a technical
alarm
alarm
Tech ZN nn OK
Zone nn alarm reset
Tel line error
Error in transmission (not for Terxon
S)
Tel line error OK
Transmission error reset
Bnn changed
User nn has changed the user code
Bnn
of user nn
Bnn deleted Bnn User nn has deleted the user code of
user nn
Bnn exit
User nn has exited the program
menu
Bnn enter
User nn has entered the program
menu
Bnn SYS OK
User nn has reset the alarm centre
Bnn SYS act
User nn has reset the alarm centre
Bnn SYS deact
User nn has deactivated the alarm
centre
Bnn time/date
User nn has changed the time and
date
Bnn ZN nn
User nn has removed ZN nn from
locked
monitoring
Bnn ZN nn
User nn has returned ZN nn to
unlocked
monitoring
The master code is saved as B00, and user codes 01 to
16 as B01 to B16. If you activate the system via a key
switch, this is shown as B21.
9.7

Changing date and time

The internal clock continues to run as long as it is supplied
with power If both the mains and the battery supply fail,
the date and time are reset. To change the date and time
(e.g., from summertime to wintertime):
Enter user code 1 (or B001 or the master code). Only this
code can change the date and time.
The display shows:
6
Press
.
The display shows:
Enter two-digit numbers for the date, month and year. Use
01 for January and 12 for December.
Confirm your input by pressing:
After the final input, the display shows:
Now enter two-digit numbers for the time.
Confirm your input by pressing:
After you enter the date and time, the alarm centre
confirms with a double tone and the control unit shows the
current date and time again.
15
UK
.
.

Advertisement

Table of Contents
loading

Table of Contents