Frame Memories; Transferring Images From The Aux Bus - Panasonic AW-HS50E Operating Instructions Manual

1. Basic operations

1-9. Frame memories

Still images can be stored in the unit's two internal frame
memories for use later.
The still images are transferred to the frame memories from
the AUX bus or computer.
  For details on the function for transferring data to
and from a computer, refer to "6. Connections with a
computer".
1-9-1. Transferring images from the AUX
bus
The frame memory settings can be selected.
[12] USER/FMEM Menu
5. FMEM Select
Select FMEM1 or FMEM2 as the number of the frame
memory in which to store the images.
PGM
PGM
INPUT1 INPUT2
INPUT5 INPUT6
  Even when MV (multi view display) is selected by the
AUX bus, the following information is not stored in the
frame memory.
Multi view display frame, names of the materials,
tally information, audio level meter
AUX
AUX
INPUT3 INPUT4
FMEM1 FMEM2
FMEM1 FMEM2
24 (E)
The images in the frame memories can be used as bus
images by assigning FMEM1 and FMEM2 in the crosspoint
buttons.
 Refer to "1-1-3. Assigning signals to the crosspoint
buttons".
In addition, the frame memory images can be used instead
of the black screen with the FTB (fade to black) function.
The data for the images stored in the frame memories can
be retained even when the power is turned off by saving it in
the flash memory area which is incorporated inside the unit.
[12] USER/FMEM Menu
6. AUX To FMEM
Rv (Review):
This setting determines whether the review display is
shown.
On: After an image has been imported, the image in
the frame memory (FMEM1 or FMEM2) selected
for the AUX bus is displayed for about 2 seconds.
Even when the review display appears, the next
image can be imported.
Off: The review display is not shown.
EX (Execute):
When the OSD/TIME dial is pressed, still images are
imported into the frame memory.
Review display
PGM
PGM
INPUT1 INPUT2
INPUT5 INPUT6
Imported still image
AUX
AUX
INPUT3 INPUT4
FMEM2
FMEM1 FMEM2