How To Install The Software; Basic Operations Of Software - Panasonic AW-HS50E Operating Instructions Manual

6. Connections with a computer

6-3. How to install the software

This section describes how to install the Data Transmission Software.
1. Insert the CD-ROM supplied with the unit into the CD-ROM drive of the host computer in which the programme will be
installed.
2. Copy the entire folder containing "Data Transmission Software" on the CD-ROM onto the hard disk drive of the host
computer.

6-4. Basic operations of software

This section describes how to operate the Data Transmission Software.
<Startup>
1. Double-click on "HS50Tool.exe" in the "Data Transmission Software" folder which was copied.
<Exit>
Click the [CLOSE] button.
<Setting the IP address>
Set the unit's IP address in the IP Address setting box.
47 (E)