Unpacking - RIEJU MRX-SMX 50 Chassis Workshop Manual

18
Rieju chassis

UNPACKING

• Unpack the motorcycle following the indications appearing on the same packaging, after
that it should be thrown according to current regulations.
"AESTHETIC" CONTROL
• Control visually that all the components of plastic material are correctly assembled and
that the motorcycle does not show any scratch, mark, etc.
IDENTIFICATION DATA
Engine identification number
• The data for identifying the engine (A/F -1) are on the right sump.
Vehicle identification number
• The identification number of the motorcycle (B/F -2) is stamped on the steering pipe. This
identification number is used to identify the moped.
SAFETY TAG
It contains the identification data of the motor-
cycle according to the 97/24/CE guidelines.
It is absolutely essential to indicate the identi-
fication data of the motorcycle when ordering
spare parts.
This tag should not be substituted either mo-
dified.
It is located in the left side of the chassis close
to the steering pipe.
A
F-1
C
C
Chassis
B
F-2
F-3