Seat - RIEJU MRX-SMX 50 Chassis Workshop Manual

28
Rieju chassis

1. SEAT

Unscrew the nut (A/F -1) located inside the cavity of the rear wheel. After, lift the seat off
the back and pull it backwards to remove it from the front catch.
A
2. REAR LATERAL COVERS
* Remove the seat.
Unscrew the 3 bolts (A/F-3).
Following, pull the part to remove it.
3. PILLION SEAT
* Remove the seat and the rear cowlings.
Unscrew the 2 bolts (A/F -4) holding the 2 nuts (B/F-5) of the lower part.
A
F-1
A
F-3
F-4
Chassis
F-2
B
F-5