Advertisement
Install the AC (alternating current) Rotisserie Motor onto the Motor Bracket as shown below. On your
4.
grill the Motor attaches to the Bracket with
that Rotisserie Motor is slid onto Motor Bracket and Stainless Steel Spit must be inserted into the
Motor.
Insert the assembled Rotisserie into the Motor as shown below. The Motor should be on the right side
5.
of your grill and the Handle on the left side. Place the Bushing into the slot opening on the left side
of your grill bowl, then tighten the Collar Thumbscrew to the right of the Bushing. The Collar will stabilize
the Rotisserie during the cooking process and the Bushing allows the Rotisserie Spit to turn smoothly.
Plug the Rotisserie into an outlet and turn on to test.
Bushing
Handle
The bushing and collar must always be used with this Rotisserie.
BEFORE rotisserie cooking you will need to remove the Cooking Grid(s) and possibly the Flame Tamers
from your grill. When rotisserie cooking place a Cooking Pan under the food to be cooked. This will capture
the drippings and keep your grill clean of excess grease which could cause a fire. Use caution when
moving a Cooking Pan containing hot oils.
the electrical cord DOWN, not up. This installation insures
Spit must be
inserted into
the Motor
Thumbscrew
Collar
Holding Forks
Thumbscrew
GRILL BOWL
28
Rotisserie Motor with
electrical cord DOWN
Motor Bracket
Spit
Advertisement
