Advertisement
Assembly Instructions
CAUTION:
While it is possible for one person to assemble this grill, obtain assistance from another person when
handling some of the larger, heavier pieces, especially the grill head.
1.
During unpacking and assembly always wear work gloves and eye protection.
2.
Open Lid of shipping carton and remove top sheet of cardboard. Lay cardboard sheet on floor and use as a work
surface to protect floor and grill parts from scratches.
3.
Remove packing materials and cart parts from shipping carton.
4.
You may slice the carton front corners with a utility knife to lay open the carton front panel. This will allow you to
raise the grill head Lid and remove the components packed inside the head, making it easier to lift.
5.
With an assistant, lift the grill head out of the shipping carton and place it on the cardboard work surface.
6.
Use the parts list to check that all parts have been included.
7.
Inspect the grill for damage as you assemble it. Do not assemble or operate the grill if it appears damaged. If
there are damaged or missing parts when you unpack the shipping box, or you have questions during the
assembly process, call:
1
Assembling The Cart To The Grill Head
1. Place 2 Caster Seats into the bottom of Left Side Panel, and 2 Caster Seats into the bottom of Right Side Panel.
2. Insert the Cart Bottom Shelf to the 4 Caster Seats. Tighten securely by using 8 of the 1/4"x1/2" Phillips Head
Screws.
3. Align the holes on Cart Side Panel, Caster Seat and Cart Bottom Shelf, and tighten securely by using eight
1/4"x2-1/2" Phillips Head Screws and eight 1/4" Flange Nuts.
Phillips Head Screw
1/4"x1/2"
Qty. 8
Ref. # S112G04081
Flange Nut 1/4"
Qty. 8
Ref. # S313G04061
Phillips Head Screw 1/4"x2-1/2"
Qty. 8
Ref. # S112G04401
1-877-934-7455
13
Advertisement
