The Source SOURCE04BLP Owner's Manual page 27

Remove all components from the carton.
11.
Attach the Motor Bracket on the outside of the right grill bowl panel. Align the two holes of the Bracket
2.
with the holes on the grill bowl. Tighten securely using two #10-24x3/4" UNC Phillips Head Screws,
Plain Washers and Hex Nuts provided.
Rot. Phillips Head Screw
#10-24x3/4" UNC
Qty. 2
Ref. #S112G10124
Rot. Hex Nut #10-24 UNC
Qty. 2
Ref. #S362G10124
Rot. Plain Washer 3/16"
Qty. 2
Ref. # S411G03084
3.
Slide a Holding Fork onto each end of the Rotisserie Spit. Adjust spacing between Holding Fork to
accommodate your food, then tighten the Thumbscrews to keep the Holding Forks in position. Slide the
Collar and Bushing onto the threaded end of the Spit. Do not tighten the Collar Thumbscrew until the
Rotisserie is placed into your grill. Last, screw the Handle onto the threaded end of Rotisserie Spit as
shown.
Rot. Thumbscrew 1/4"x1/2"
Qty. 2
Ref. #S196G04081
Rot. Thumbscrew #10x1/2"
Qty. 1
Ref. #S196G10081
Rotisserie Instructions
Thumbscrew
#10X1/2"
Bushing
Handle
Outside of right
grill bowl panel
Holding Forks
Thumbscrew
1/4"x1/2"
Collar
27
Motor
Bracket
#10-24x3/4" UNC
Phillips Head Screw
Spit
Thumbscrew
1/4"x1/2"