The Source SOURCE04BLP Owner's Manual page 15

2
Install The Tank Pull-Out Tray (For LPG model only)
1. Attach Tank Pull-Out Tray Stop to Cart Bottom Shelf by using two 1/4"x1/2" Phillips Head Screws.
2. Install the Tank Pull-Out Tray to the Cart Bottom Shelf. Tighten securely by using 4 of the 1/4"x1/2" Phillips Head
Screws.
Phillips Head Screw
1/4"x1/2"
Qty. 6
Ref. # S112G04081
3
Install The Doors
1. Attach each Door Handle to Doors by using 4 of the 1/4"x1/2" Phillips Head Screws.
2. Place Right Bottom Door axle into Door axle hole on the bottom of Right Side Panel.
3. Place Door Bracket hole into the Door axle on the top of Right Door.
4. Install Door Bracket to the top of Right Side Panel. Tighten loosely by using 2 of the 1/4"x1/2" Phillips Head Screws.
5. Place Left Bottom Door axle into Door axle hole on the bottom of Left Side Panel.
6. Lift Door Bracket and place hole into the Door axle on the top of Left Door.
7. Install Door Bracket to the top of Left Side Panel. Tighten loosely by using 2 of the 1/4"x1/2" Phillips Head Screws.
8. Adjust the 2 Doors and Door Bracket then tighten securely by using 4 of the 1/4"x1/2" Phillips Head Screws.
Phillips Head Screw
1/4"x1/2"
Qty. 12
Ref. # S112G04081
15