Page 1
INSTALLATION, MAINTENANCE AND USE INSTRUCTIONS FOR FREE-STANDING COOKERS 90x60 cm (type M9V) 60x60 cm (type M6V) TU95C61DX TU95C71DX TU64C61DX TU64C71DX READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance.
INSTALLER TECHNICAL MANUAL ....................... pg. 2 Installing the cooker - Installation information ....................pg. 2 Ventilation and aeration of rooms ........................pg. 3 Gas connection ............................... pg. 3 Adaptation to different types of Gas and burner adjustments ................pg. 4 Electric connection ............................
When making the connection, take care not to apply excessive stress by counterbalancing tightening force. Ensure that the available gas supply is the same as the gas type label affixed near the gas connection point. If not, contact Bertazzoni Service Center for a Gas Conversion Kit.
Page 4
Natural Gas The natural gas regulator supplied must be fitted for natural gas. Ensure the arrow on the regulator points towards the direction of the gas flow. Commissioning Procedure - The test point pressure must be adjusted to 1.00 kPa with the Wok and Rapid Burners operating on maximum flame.
Page 5
TABLE N° 1: Adaption to various types of gas Burners Gas type Pressure (kPa) Injector (mm) Mj/hr Small Natural 1.00 0.90 3.85 Small U-LPG 2.75 0.54 3.75 Medium Natural 1.00 1.18 7.12 Medium U-LPG 2.75 0.70 6.20 Large Natural 1.00 1.55 12.0 Large...
4) With a slotted screwdriver turn the choking screw (see figure 15) and, while observing the flame at the same time through the cooker porthole, evaluate the consistency of the flame so it remains on when switching quickly from the MINIMUM to the MAXIMUM position.
Page 7
When satisfied with the appliance, please instruct the user on the correct method of operation. In case the appliance fails to operate correctly after all checks have been carried out, please call the Bertazzoni Service Center. APPLIANCE MAINTENANCE...
5) Replace all the pieces by reversing the order in which they were disassembled and check that the valve operates correctly. 6)To replace the power cable, lift the terminal board’s cover and replace the cable. To access the terminal board in cookers with a 3x2.5mm²...
the symbol shows the oven fan working button as to allow the oven to operates with fan assisted gas. The fan operation of the oven prevents the operation of the electric grill, which therefore cannot be used with the fan in action. the symbol shows the ignition key for the oven light (all except the electric fan oven) the symbol...
Page 10
part the various traditional baking notions. When roasting meat it is not necessary to turn the meat any more and for a roast on the spit, it is not indispensable to use the spit-roaster, but is sufficient to put the meat directly on the grate. With the use of the fan gas oven, the baking temperatures are slightly lower of about 10-15°...
- the symbol indicates that the top external element (900W), the grill element (2000W) and the electric fan have been turned on; - the symbol indicates that the circular element (2400W) and the electric fan have been turned on; - the symbol indicates that only the electric fan has been turned on.
POSITIONING THE OVEN TRAYS & SHELVES The Grill Tray or Oven Shelf can be located in any of the four height positions in the oven (See Fig. 26a). Refer to the ‘Oven Cooking Tables’ for the recommended shelf position. When fitting the trays or shelves, ensure they are fitted between the two wires that are closest together (See Fig.
USING THE CONVENTIONAL ELECTRIC GRILL The electric grill can also be combined with the gas oven or electric oven. In both cases, the grill is controlled using the oven’s temperature knob (see also, Using the gas or electric oven). Like the gas grill, the electric grill can be used for grilling on the oven’s grill or using the roasting spit.
• Burners not igniting properly. • Gas valves, which are difficult to turn. In case the appliance fails to operate correctly, contact Bertazzoni Service Center. CLEANING THE APPLIANCE Before cleaning the appliance, it should be disconnected from the power supply and turn off the main gas feeder valve.
This data is provided on the data label adhered to the base of the appliance and on the duplicate data label. Always use original Bertazzoni spare parts.
Need help?
Do you have a question about the TU95C61DX and is the answer not in the manual?
Questions and answers