Table of Contents
Advertisement
3
44
To increase the spring
preload:
• Turn handwheel 1 in the
direction of arrow HIGH.
To decrease the spring
preload:
• Turn handwheel 1 in the
direction of arrow LOW.
Basic setting for solo
operation:
• Turn handwheel 1 in the
arrow direction LOW up to
the limit position.
• Turn 15 clicks in the arrow
direction HIGH.
One click corresponds to
a half turn of the hand-
wheel. The range of adjust-
ment comprises 15 turns. The
basic setting is based on a
motorcycle with a full fuel
tank and one person weighing
85 kg.c
Adjustments to the
spring preload and shock
absorbers that are not co-ordi-
nated lead to a deterioration in
the handling characteristics of
your motorcycle.
Adapt the damping action of
the spring preload.c
Shock absorbers
Adjusting the shock
absorber on the rear
wheel
The damping must be adapted
to the spring preload. An
increase in the spring preload
requires stronger damping, a
reduction in the spring preload
requires softer damping.
• Place the motorcycle on the
OA
centre stand
or side
stand, ensuring that the
ground is firm and level.
Advertisement
Table of Contents
