Table of Contents
Advertisement
Calling up settings
3
46
• Switch on the ignition.
• Press button 1 briefly.
» The current setting is
displayed.
2 Damping set
3 Spring preload set
If button 1 is not pressed for
longer than two seconds, the
display goes out.
Adjusting the shock
absorbers
Three adjustments are possi-
ble; these are shown in the
field 2 as follows:
Comfort,
soft damping
Normal,
medium damping
Sport,
hard damping
• Switch on the ignition.
• Press button 1 briefly.
» The current setting is
displayed.
• Press button 1 once briefly.
» Starting from the current
status, the display is in the
following order:
– Comfort
– Normal
– Sport
Advertisement
Table of Contents
