Table of Contents
Advertisement
Checking the brake pad
thickness at the rear
• Place the motorcycle on the
OA
centre stand
or side
stand, ensuring that the
ground is firm and level.
• Perform a visual inspection
of the brake pad thickness
from the right.
The brake disc must not be
visible through bore hole 1 of
the inner brake block. If the
brake disc is visible:
• Have the brake pads
replaced, preferably by an
authorised BMW motorcycle
dealer.
Checking the brake fluid
level
If the position of the
brake-fluid reservoir is
changed, air can enter the
brake system.
Do not twist either the handle-
bar controls or the handle-
bars.c
1 Front brake-fluid reservoir
2 MIN mark
6
91
Advertisement
Table of Contents
