Table of Contents
Advertisement
Screw connections tight-
ened to the incorrect
torque can come loose or
damage the screw connection
itself.
Make sure that you have the
tightening torques checked,
preferably by an authorised
BMW motorcycle dealer.c
• If the BMW Motorrad rear
wheel stand is used: remove
the retaining disc.
• Roll the rear wheel onto the
rear wheel support.
• Place the rear wheel on the
rear wheel support.
• If the BMW Motorrad rear
wheel stand is used: attach
the retaining disc again.
• Fit wheel bolts 5 and tighten
crosswise to the appropriate
tightening torque.
• Turn the end silencer into its
initial position.
• Fit bolt 4 on the end silencer
bracket to the pillion foot-
rest, but do not tighten.
6
101
Advertisement
Table of Contents
