Rear Wheel Stand - BMW 2004 K 1200 S Rider's Manual

• Tighten aligning screws 1.
6
104
• Press the front wheel stand
evenly downwards to raise
the motorcycle.
If the motorcycle is on the
centre stand
front of the motorcycle is
raised too far, the centre stand
rises from the ground and the
motorcycle can fall over
sideways.
When the front is raised, make
sure that the centre stand
remains on the ground.c

Rear wheel stand

In order to be able to work
safely also on motorcycles
without centre stands
BMW Motorrad provides a rear
wheel stand. The rear wheel
stand with BMW special tool
number 363980 can be
obtained from your authorised
BMW motorcycle dealer.
Mounting the rear wheel
stand
OA
: If the
• Set the desired height of the
rear wheel stand using the
bolts 1.
• Remove retaining disc 2.
OA
,
To do so, press release
button 3.
• Push the rear wheel stand
from the left into the rear
axle.
• Apply the retaining disc from
the right; to do so, press the
unlock button.