Table of Contents
Advertisement
Without BMW Integral ABS:
• Press the handbrake lever
firmly a number of times until
the resistance point is
noticeable.
With BMW Integral ABS:
• Switch on the ignition.
• Wait for the self-diagnosis
(
54) .
b
• Press the handbrake lever
firmly a number of times until
the resistance point is
noticeable.
Brake pads that are not fully
applied to the brake discs
lead to delays in the braking ef-
fect. Before beginning a journey,
check that the braking effect
kicks in without any delay.c
Removing the rear wheel
You will find an overview
of the types of screw
used on (
124).c
b
Motorcycle without centre
OA
stand
:
To ensure a secure stance of
the motorcycle during the
following work:
• Place the motorcycle on the
BMW Motorrad rear wheel
stand (
104).
b
• The rest of the procedure is
the same as for motorcycles
with centre stands.
Motorcycles with centre
OA
stands
:
• Place the motorcycle on the
OA
centre stand
.
• Remove bolt 1 from silencer
cover 2.
• Pull off the cover towards the
rear.
6
99
Advertisement
Table of Contents
