Table of Contents
Advertisement
6
110
• Pull the lamp housing on the
screw connection side out of
the mirror housing.
• Remove the bulb holder 2
from the lamp housing by
turning it anticlockwise.
• Remove the bulb 3 from the
bulb holder.
Assemble in reverse order.
• To hold the new bulb, use a
clean, dry cloth.
Replacing the rear turn
indicator bulb
During the work de-
scribed below, a motor-
cycle that has been parked
insecurely can fall over.
Make sure that the motorcycle
is parked securely.c
• If necessary, switch off the
ignition.
• Remove the bolt 1.
• Pull the lamp housing on the
screw connection side out of
the turn indicator housing.
Advertisement
Table of Contents
