Network Remote Control Options; Confi Guration - Roberts Stream217 Instruction Manual

Network remote control options

Network PIN setup (PIN number)
Your radio has the option of being controlled by an application installed on an
Apple iPhone, iPod touch, iPad or equivalent Android device. The PIN number
facility allows you to ensure that your radio can only be controlled by your own
device rather than someone else's.
The remote control application is called UNDOK, by Frontier Silicon Limited, and
is available from the Apple App Store and Google Play Store for your device.
UNDOK will try to use the default PIN of '1234' to control your radio.
You may change the PIN if desired using the 'NetRemote PIN Setup' option in
the Network settings menu. The updated PIN should then be used in the UNDOK
app to allow the app to reconnect to the radio. The app will prompt you for the
PIN as needed.
Keep network connected
Your radio has the option to shut down its WiFi or Ethernet connection when it is in
Standby. This minimises power consumption but it does mean that you will need to
switch the radio on manually in order to use either Spotify Connect, the 'Play to' /
'Cast to Device' function or any remote control software such as the UNDOK app.
If you need to be able to remotely control the radio even when it has been put
into Standby, then you can choose to keep the network connected by using the
'Keep network connected' option in the network settings menu. In the Standby
mode display the WiFi signal indicator is shown with or without a cross through it,
or the Ethernet connection indicator is shown unplugged or plugged in, according
to the state of the connection.
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup
The UNDOK app logo.
Wlan region
Manual settings
NetRemote PIN Setup
Network profile
Clear network settings
Keep network connected
Confi guration
Network settings
Network settings
18