Manual Network Confi Guration - Roberts Stream217 Instruction Manual

Dab/fm/wifi internet radio with music player
Table of Contents

Advertisement

Manual network confi guration - cont.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the Info button and then use the Tuning/Select control as needed:
select '
' to erase a character just entered (long press to clear); Info again to continue
select '
' when the complete encryption key has been entered
select '
' to cancel and go back to the SSID settings screen
Once the key is entered the radio should connect to your network. Please skip to step 11.
9. WPA and WPA2 are more secure than WEP, although of these two WPA2 offers a higher level of
security. Having selected WPA/WPA2 in step 7, you then have to specify the variant used. They are
AES (Advanced Encryption Standard) and TKIP (Temporal Key Integrity Protocol). Simply select the
'PSK AES/TKIP' menu option using the Tuning/Select control.
10. The radio will then require you to enter the encryption key. This must be a string of between 8 and
63 characters and must be identical to the key which has been entered into your router. Note - the
encryption key is sensitive to the use of upper and lower case letters and symbols. Take care to enter
the key exactly, or the radio will not be able to connect to your router.
The three controls on the right-hand side of the screen have special functions. You can quickly access
these by pressing the Info button and then use the Tuning/Select control as needed:
select '
' to erase a character just entered (long press to clear); Info again to continue
select '
' when the complete encryption key has been entered
select '
' to cancel and go back to the AES / TKIP options screen
Once the key is entered the radio should connect to the network.
11. While the radio is trying to connect to the network, it will display 'Connecting...'. If the connection is
made successfully, the radio will return to the Network Settings menu. If the unit cannot connect, then
it will display a 'Failed to connect' message and will return to the SSID entry screen (step 6).
Once connected, the network settings are stored in the radio. The settings are retained when the radio
is disconnected from the mains.
You may now use the Back and Mode buttons to access the functions of your internet radio.
17
Authentication
Open
WEP
WPA/WPA2
Encryption type
PSK AES / TKIP
Key:
01234ABCDE
0 1 2 3 4 5 6
7 8 9
. _ - @
,
a b c d e
f
g h
i
j k l
m n o p q r s
Network settings
Please wait
Connecting...
Network settings
Network wizard
PBC Wlan setup
View settings
Wlan region
Manual settings
NetRemote PIN Setup

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents