When To Charge The Battery; Unpacking - 909 H144L1 Instruction Manual

When to charge the battery

New batteries are shipped in a low charged condition and
should be fully charged before use.
The battery pack can be recharged at any time during use,
provided the pack is not overheated.
If the battery pack starts to cut out due to low voltage, or
previous tasks undertaken can no longer be performed, it is
suggested to stop using the tool and recharge the battery.
For storage, it is suggested to recharge the battery between
50% and 75% charge.

Unpacking

Due to modern mass production techniques, it is unlikely
that your 909 power tool is faulty or that a part is missing.
If you find anything wrong, do not operate the tool until the
parts have been replaced or the fault has been rectified.
Failure to do so could result in serious personal injury.
9