Canon 4K500ST User Manual page 30

Before Use
Remote Control
The remote control allows you to operate all functions of the projector.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)
(10)
(1) POWER button (P60, P79)
Turns the projector on or off.
(2) ASPECT button (P72, P88)
Changes the aspect ratio mode.
(3) Pointer buttons (P85)
Selects the upper, lower, left or right
item in the menu. Also used to assign a
channel to the remote control.
(4) OK button (P86)
Determines the item selected from the
(11)
menu.
(5) ZOOM button (P68)
(12)
Adjusts the image size.
[ ] / [ ] buttons:
Increase the image size.
[ ] / [ ] buttons:
Decrease the image size.
(6) FOCUS button (P67)
Adjusts focusing.
[ ] / [ ] buttons:
Moves the focus position further away.
[ ] / [ ] buttons:
Moves the focus position nearer.
By pressing the FOCUS button twice,
you can also adjust the focus at image
edges (P157), depending on the
[Marginal focus] setting (P102).
(7) TEST PATTERN button (P107)
Displays the test pattern.
(8) D.ZOOM button
Not used with this product.
(9) Ch button (P113)
Changes the remote control channel
when the remote control is used via the
infrared transmitter.
(10) IMAGE button (P76)
Switches the image mode (image
quality).
(11) AUTO PC button
Not used with this product.
(12) INPUT button (P63)
Switches the input signal.
30