Advanced Registration To Adjust Projected Images - Canon 4K500ST User Manual

Advanced Registration to Adjust Projected
Images
Any values you set in 5-point adjustment are retained if you subsequently perform
manual adjustment. For more precise correction after 5-point adjustment, perform
manual adjustment.
This feature enables precise correction of red, green, or blue misalignment in
different areas of the screen by color and area.
Two methods of registration are available: 5-point adjustment (using points in the
corners and center of the screen) and more precise manual adjustment based on
54 points (in a 6 x 9 grid).
• Adjust zoom and lens shift as needed before using [Advanced registration].
• Performing keystone adjustment will prevent accurate adjustment with [Advanced
registration]. If keystone adjustment is required, complete adjustment with [Advanced
registration] first.
■ Registration Using 5-Point Adjustment
5-point adjustment enables basic correction of color misalignment across the
screen, by moving adjustment points in each corner and the center.
1
In the [Install settings] menu, select [Professional settings] > [RGB
alignment] > [Advanced registration] > [Adjust] > [5-point adjustment] >
[Adjust].
The projector enters 5-point adjustment mode, and a point selection window is
displayed.
• Two sizes of point selection windows are used, depending on [Panel drive mode].
• With advanced registration, checkered or halftone image areas may be affected by
uneven colors or image artifacts.
Advanced Projection
153