Wipe Effects; Border; Position; Matte - Data Video SE-700 Instruction Manual

7.1.2 Wipe Effects

This sub-option allows the user to select the Wipe Effect as well as configure the wipe's border softness
and width.
• Wipe – Wipe Effect Selection.
• Soft – A low value results in a solid edge border and a high value gives a soft diffused border.
• Width – A low value results in a thin border and a high value gives a wide border.

7.1.3 Border

After selecting this sub-option, the user will then be allowed to fine-tune the border color by adjusting
the Luma, Saturation and Hue values, i.e. Luma, Sat and Hue.

7.1.4 Position

Position allows the user to adjust the centre position of some wipes (e.g Circle & Elipse). X represents the
horizontal position and Y represents the vertical position.
X
Positive value: position the wipe centre to the right
Negative value: position the wipe centre to the left
Zero value: Position the wipe centre at the screen
centre

7.1.5 Matte

The user can configure the Matte Luma, Saturation and Hue under this sub-option.
Y
Positive value: move the wipe centre up
Negative value: move the wipe centre down
Zero value: Position the wipe centre at the screen
centre
28