Data Video SE-700 Instruction Manual page 13

PIP Selection /
PGM & PVW
Settings
Keyer Selection /
PGM & PVW
Settings
DSK Selection /
PGM & PVW
Settings
FTB
13
PIP PGM: Shows the configured PIP on multiview
and PGM outputs.
PIP PVW: Shows the configured PIP on PVW and
multiview outputs. Holding down this button also
allows selection of the PIP source from the
Preview Source row. The selected source button
will flash.
PIP SETUP: Press PIP SETUP button to open the
PIP configuration menu.
KEYER PGM: Enables the key (Chroma / Luma /
Linear) on multiview and PGM output
KEYER PVW: Enables Keyer on PVW and
multiview outputs. Press and hold this button to
select Keyer KEY source from the Preview Source
row. The selected source button will flash.
KEYER SETUP: Press this button to open Keyer
configuration menu on multiview output (Chroma
/ Luma / Linear). Press and hold this button to
select Keyer FILL source from the Preview Source
row.
DSK PGM: Enables the DSK on multiview and
PGM outputs.
DSK PVW: Shows the DSK on PVW and multiview
outputs. Press and hold this button to select DSK
Key source from the Preview Source row. The
selected source button will flash.
DSK SETUP: Press this button to open DSK
configuration menu. Press and hold this button to
select DSK FILL source from the Preview Source
row.
Selection of the Fade to Black transition effect