Wiping Between Sources - Data Video SE-700 Instruction Manual

5.3 Wiping between Sources

In order to WIPE between two video sources, first ensure the transition background or TRANS BG button
is ON.
Pressing WIPE will use the current wipe transition selected when moving from the program video source
to the selected next source on the preset row.
The timing of this MIX transition can be manually decided when moving the T-Bar or completed over a
set time when using the AUTO button.
To change the rate of transition for the AUTO button, follow the menu path START> TRANSITION and
change the M/E duration value in frames. If this value is small, then the wipe transition will happen
quickly. If this value is larger, then the wipe will take longer to complete.
TRANS BG
Enables background transition between Program / Preset
WIPE transition effect
Wipe Transition
Selection
WIPE Reversal
BDR ON/OFF
BDR SOFT
BDR COLOR
BDR SIZE
WIPE Transition Selection
Each Wipe button consists of black and white colors. The white
represents the current Program image and the black represents
the WIPE-IN image. There are a total of 32 WIPE presets offered
by the SE-700; the WIPE buttons allow the user to make a
selection directly from the control panel for the first 12 and
remaining 20 WIPE effects are selectable from the menu path
START > WIPE > WIPE VALUE
Pressing "REV" button reverses the direction of the WIPE.
Turns the WIPE border function ON/OFF
Adjustment of the border softness
To fine tune the border softness, please use the menu path
START > WIPE > SOFT
Select the border color by pressing this button
To fine tune the border color, please use the menu path
START > BORDER > to change HUE, LUMA and SAT values
Selection of the border width
20