Chapter 4 Se-700 Video; Multi View - Data Video SE-700 Instruction Manual

Chapter 4 SE-700 Video

4.1 Multi View

The SE-700 Multi view output can be supplied from the HDMI or SDI outputs, see Chapter 3. The layout
of the multi view cannot be changed. The sources can be swapped around using the cross point section
of the Inputs menu.
The Multi view shows monitoring images for Preview (PVW), Program (PGM), Inputs 1~4, Still and Freeze
channels as well as SDI outputs 1 and 2.
The Multi view can also show audio level bars overlaid on the Program image. This confirms the
analogue XLR audio input is being received and embedded to the selected Program output(s).
A Red tally indication box is shown around the selected Program source. This video image is also seen at
the switchers selected Program output(s). A Green tally indication box is shown around the selected
Preview source. This will be the image source to be mixed to, wiped in or cut to next depending on the
user's preference.
STILL image is an image pre-loaded from one of the SE-700's frame stores (FS1, FS2 or FS3). See the
Frame Stores section for more information.
FREEZE image is a frozen image taken immediately from one of the SE-700's four live input channels or
alternatively from one of the possible 1000 pre-loaded memory points.
Images SDI out 1 and SDI out 2 confirm what is being sent from those SDI outputs. These outputs can be
configured differently by the user, see Chapter 3. Please refer to the section on outputs menu for more
details.
17