Led And Beeper Indications - Datalogic QuickScan QM2400 Quick Reference Manual

Radio Features
Frequency working center
Range (in open air)
Max number of devices per
base station

LED and Beeper Indications

The reader's beeper sounds and its LED illuminates to indi-
cate various functions or errors on the reader. An optional
"Green Spot" also performs useful functions. The following
tables list these indications. One exception to the behaviors
listed in the tables is that the reader's functions are program-
mable, and so may or may not be turned on. For example, cer-
tain indications such as the power-up beep can be disabled
using programming bar code labels.
Indication
Power-up Beep
Good Read Beep
ROM Failure
Limited Scanning
Label Read
Reader Active
Mode
Quick Reference Guide
Description
The reader is in the pro-
cess of powering-up.
A label has been success-
fully scanned by the
reader.
There is an error in the
reader's software/pro-
gramming
Indicates that a host con-
nection is not estab-
lished when the IBM or
USB interface is enabled.
The reader is active and
ready to scan.
LED and Beeper Indications
433MHz
25 m
16
LED
N/A
LED behavior for this
indication is configu-
rable via the feature
"Good Read: When to
Indicate"
(see the PRG for infor-
mation.)
Flashes
N/A
The LED is lit steadily
Beeper
Reader beeps four
times at highest fre-
quency and volume
upon power-up.
The reader will beep
once at current fre-
quency, volume,
mono/bi-tonal setting
and duration upon a
successful label scan.
Reader sounds one
error beep at highest
volume.
Reader 'chirps' six
times at the highest
frequency and current
volume.
a
N/A
33