Pick Mode; Multiple Labels In A Volume - Datalogic QuickScan QM2400 Quick Reference Manual
General purpose handheld area imager bar code reader with datalogic’s star cordless system
Hide thumbs
Also See for QuickScan QM2400:
- Quick reference manual (52 pages) ,
- Quick reference manual (52 pages)
Table of Contents
Advertisement
Scan Modes
Pick Mode
Pick Mode is a Decoding and Transmission process where bar
codes that are not within the configurable distance from the
center of the aiming pattern are not acknowledged or trans-
mitted to the host. It is active only while the scanner is in
Trigger Single mode. If the scanner switches to a different
Read Mode, Pick Mode is automatically disabled.
This feature is not compatible with Multiple
Labels Reading in a Volume. See the PRG for
more information.
NOTE
Multiple Labels in a Volume
Enables/disables the ability of scanner to decode multiple
labels in the same image. Several programming options are
available for this feature, see the PRG for more information.
28
ENTER/EXIT PROGRAMMING MODE
♦ Pick Mode = Disable
Pick Mode = Enable
QuickScan™ QM2400
Hide quick links:
Advertisement
Table of Contents
