Connecting The Base Station; Base Station Connection And Routing - Datalogic QuickScan QM2400 Quick Reference Manual

Connecting the Base Station

Connecting the Base Station
Figure 3
shows how to connect the Base Station to a termi-
nal, PC or other host device. Turn off the host before connec-
tion and consult the manual for that equipment (if necessary)
before proceeding. Connect the interface cable before apply-
ing power to the Base Station.
The QuickScan QM2400 reader can also be Pow-
ered by the Terminal. When powered by the Ter-
minal, the battery charger is automatically set as
Slow charge.
NOTE
For some specific interfaces or hosts or lengths
of cable, the use of an external power supply may
be recommended for full recharging capability
(see
more details).

Base Station Connection and Routing

1. Remove the rubber Cable Stopper from the bottom of
the Base Station.
2. Securely plug the Power Cable and Interface (I/F) Cable
connectors into their respective ports in the underside
of the Base Station.
Cable Stopper
4
"Technical Specifications" on page 29
Power Cable
I/F Cable
QuickScan™ QM2400
for