be adjusted to three positions using lever
«A»
in
the kit.
If an irregular operation of the hydraulic dampers
is noticed
,
have them checked in one of our dea-
lers
workshops.
Caution - Do not forget that the two springs have
to be adjusted to the same position to ensure
good stability to the motorcycle.
Adjusting the steering
(fig
.
20)
For safe riding the steering has to be adjusted
so as to allow free movement to the
handlebar,
but without excessive
play.
To correctly adjust, proceed as follows:
-
slacken steering head fixing bolt «A»;
-
undo steering head nut «8 »;
-
screw in or out adjuster nut «e
»
to take up
the excessive
play.
This done, tighten nut
«
8
»
and steering head
fixing bolt «A
».
It is well for this operation to be carried out by
one of our
dealers.
31